HP bets on economics at Formnext 2026: a smaller printer, bigger output and two-tone parts

HP has rolled into Formnext with a message that is hard to miss: industrial 3D printing has to pay its way. A compact new Multi Jet Fusion printer, a 20% output boost for the Jet Fusion 5600 series, white-and-grey parts from a single build, cheaper service plans and a fresh batch of Metal Jet materials make up the pitch.

A compact MJF for everyone

The HP Multi Jet Fusion (MJF) 1200 3D Printer Solution begins selected availability in January 2027, with general availability in April 2027. It launches with HP 3D High Reusability PA 12, enabled by Evonik, with more materials planned. Alongside it, HP has qualified DyeMansion’s Powershot Go, which brings PolyShot Cleaning and Surfacing into one compact finishing workflow. “The Powershot Go brings the same simplicity and speed to finishing that the HP MJF 1200 brings to printing,” said DyeMansion CEO Felix Ewald.

HP Multi Jet Fusion 1200 3D Printer. Image courtesy of HP.

Early users are impressed. CASMARPAL’s Albert Martínez says the printer lets his firm “take on a wider range of industrial projects, with an investment that makes business sense for a company our size.” Aurea Avionics is speeding up lightweight drone production, and Hunter prints “high-integrity, isotropic plastic parts with complex geometries by the next day.”

More from what you have

A new High Productivity Print Mode lifts output of the HP Jet Fusion 5600 3D Printer Series by 20%, arriving in early 2027. HP is also teaming up with Xometry, combining MJF technology and data intelligence with Xometry Workcenter to match demand with capacity across its MJF partner network, for faster turnaround and better economics. “Custom manufacturing works best when capacity and demand find each other without friction,” said Xometry CEO Sanjeev Singh Sahni.

Dual Tone: two shades of smart

MJF Dual Tone puts white and grey tones in a single part for identification, traceability and visual differentiation, cutting secondary marking. It arrives in Spring 2027 as a firmware update for 5600 customers using HP 3D High Reusability PA 12 W and HP 3D800 agents, with design capabilities accessible through AI tools such as Claude and ChatGPT.

Invent Medical’s Michael Rosicky sees real choice for pediatric and adult patients: “when a device feels like part of you and fits your lifestyle, you accept it and wear it.” JawsTec CEO Oscar Klassen says batch tracking, QR codes and AI-generated textures can be added “as the part is submitted.” AITIIP’s Pablo Murillo also welcomes fewer manual marking steps.

Cheaper service

HP 3D Essential Care is priced up to 40% below HP 3D Foundation Care for Jet Fusion 4200 customers. Shared care for large multi-unit customers adds loyalty- and performance-based incentives, monitoring tools, maintenance best practices and access to HP experts.

Metal Jet gets exotic

  • Alloyed: CM247LC nickel superalloy above 98% of theoretical density, including turbine-wheel benchmarking.
  • IndoMIM: In718 qualified, with about 1,369 MPa tensile strength, 1,145 MPa yield and 20% elongation after heat treatment.
  • Dauch: pure copper commercially available from its Auburn Hills, Michigan facility.
  • Hyperion: tungsten carbide, after an HP Metal Jet S100 was installed in Barcelona in October 2026.

Filaments and AI

The HP Filament Network links customers with qualified suppliers of high-temperature materials, building on the open architecture of the HP Industrial Filament 3D Printer 600 HT Solution. On the AI roadmap: Dual Tone geometry creation, in-situ defect prediction, a service chatbot and telemetry-based maintenance.

See it live

Find HP in Hall 12.1, Booth D41, with a CUPRA Raval component, the Psyonic Ability Hand, drones and Dual Tone orthotics. As SVP & GM Alex Moñino put it: “The next phase of industrial additive manufacturing will be defined by production economics and scale.”

Leave a Reply

Your email address will not be published. Required fields are marked *

→ Contents